WVSAMB DEM Data North Zone
Metadata also available as
Metadata:
- Identification_Information:
-
- Citation:
-
- Citation_Information:
-
- Originator: The West Virginia Statewide Addressing and Mapping Board
- Publication_Date: 20040630
- Title: WVSAMB DEM Data North Zone
- Geospatial_Data_Presentation_Form: vector digital data
- Publication_Information:
-
- Publication_Place: Charleston, WV
- Publisher: West Virginia Statewide Addressing and Mapping Board
- Description:
-
- Abstract:
-
This project consists of photogrammetrically produced planimetric mapping, DEM creation, and digital color orthophotography of the State of West Virginia. The W.V. state plane system has two cartographic zones, north and south. This data set consists of 10,000' x 10,000' MicroStation DGN files of the north zone DEM data. The aerial photography used for this project was captured at a negative scale of 1" = 2400' in the spring of 2003.
- Purpose: Aerial survey of the state of West Virginia
- Supplemental_Information:
-
© West Virginia Statewide Addressing and Mapping Board. All rights reserved. For 9-1-1 use only except as authorized in writing by the West Virginia Statewide Addressing and Mapping Board. No other use or distribution without the express written permission of the West Virginia Statewide Addressing and Mapping Board, Under Penalty of Law.
- Time_Period_of_Content:
-
- Time_Period_Information:
-
- Range_of_Dates/Times:
-
- Beginning_Date: 20030310
- Ending_Date: 20030606
- Currentness_Reference: ground condition
- Status:
-
- Progress: Complete
- Maintenance_and_Update_Frequency: Unknown
- Spatial_Domain:
-
- Bounding_Coordinates:
-
- West_Bounding_Coordinate: -081.83952
- East_Bounding_Coordinate: -077.58379
- North_Bounding_Coordinate: 40.68067
- South_Bounding_Coordinate: 38.61337
- Keywords:
-
- Theme:
-
- Theme_Keyword_Thesaurus: None
- Theme_Keyword: digital orthophoto
- Theme_Keyword: digital image map
- Theme_Keyword: aerial photograph
- Theme_Keyword: rectified photograph
- Theme_Keyword: rectified image
- Theme_Keyword: orthophoto
- Theme_Keyword: DEM
- Place:
-
- Place_Keyword_Thesaurus: None
- Place_Keyword: West Virginia
- Place_Keyword: Hancock County, WV
- Place_Keyword: Brooke County, WV
- Place_Keyword: Ohio County, WV
- Place_Keyword: Marshall County, WV
- Place_Keyword: Wetzel County, WV
- Place_Keyword: Tyler County, WV
- Place_Keyword: Pleasants County, WV
- Place_Keyword: Wood County, WV
- Place_Keyword: Wirt County, WV
- Place_Keyword: Ritchie County, WV
- Place_Keyword: Doddridge County, WV
- Place_Keyword: Harrison County, WV
- Place_Keyword: Marion County, WV
- Place_Keyword: Monongalia County, WV
- Place_Keyword: Taylor County, WV
- Place_Keyword: Barbour County, WV
- Place_Keyword: PrestonCounty, WV
- Place_Keyword: Tucker County, WV
- Place_Keyword: Grant County, WV
- Place_Keyword: Hardy County, WV
- Place_Keyword: Mineral County, WV
- Place_Keyword: Hampshire County, WV
- Place_Keyword: Morgan County, WV
- Place_Keyword: Berkeley County, WV
- Place_Keyword: Jefferson County, WV
- Access_Constraints:
-
Until further notice access is limited to the WV SAMB and its consultants, 55 counties of West Virginia, RTI, USDA-NRCS, and West Virginia Division of Highways. Each of these agencies is bound by the terms of contractual agreements stating the manner in which data may be accessed. None of these agencies may distribute these data to a 3rd party without the expressed written permission of the West Virginia Statewide Addressing and Mapping Board.
- Use_Constraints:
-
The data represents the results of data collection/processing for a specific WVSAMB E 9-1-1 project, and indicates the general existing conditions. As such, it is only valid for its intended use, content, time, and accuracy specifications. The user is responsible for the results of any application of the data for other than its intended use.
- Point_of_Contact:
-
- Contact_Information:
-
- Contact_Person_Primary:
-
- Contact_Person: Craig A. Neidig
- Contact_Organization: West Virgina Statewide Addressing and Mapping Board
- Contact_Position: Chair WVSAMB
- Contact_Address:
-
- Address_Type: mailing and physical address
- Address: 1124 Smith Street
- Address: Room LM-10
- City: Charleston
- State_or_Province: WV
- Postal_Code: 25301
- Country: USA
- Contact_Voice_Telephone: 304-558-4218
- Contact_Facsimile_Telephone: 304-558-4963
- Contact_Electronic_Mail_Address: cneidig@gis.state.wv.us
- Data_Set_Credit:
-
This data set was created for the West Virginia Statewide Addressing and Mapping Board by BAE SYSTEMS ADR, Inc.
- Native_Data_Set_Environment: MicroStation Design File
- Data_Quality_Information:
-
- Attribute_Accuracy:
-
- Attribute_Accuracy_Report:
-
The accuracy of the ground control and airborne GPS data is confirmed by the evaluation of the results of the analytical bundle adjustment. The residuals of the final adjustment ensured compliance with NSSDA standards. During the scanning of the original aerial film, the image histogram for each frame is carefully examined to ensure that the image has been scanned so that the minimum and maximum brightness values are captured to eliminate any loss of detail due to saturation of dark or light areas. Evaluation of the DEM includes checking the terrain data for spikes and wells, omissions, and other anomalies that do not meet the project accuracy requirements. Using the adjusted horizontal coordinates of the aerotriangulation points, their heights are interpolated from the neighboring DEM points. The interpolated coordinate of the aerotriangulation point is then compared with the actual adjusted Z value of the aerotriangulation result. Visual inspection of the stereoscopic model and contour lines (generated only for QA/QC purposes) is also made allowing the detection of errors in the DEM.
- Logical_Consistency_Report:
-
All files are inspected by the Production Manager to ensure that they conform to the specified file naming conventions, all files load in their correct geographic position, all files conform to the project specifications for file standard and content.
- Completeness_Report:
-
All files are visually inspected for completeness to ensure that no gaps or misplacement exists in the data. The files have been checked to ensure that the boundary and the content has been covered in its entirety.
- Positional_Accuracy:
-
- Horizontal_Positional_Accuracy:
-
- Horizontal_Positional_Accuracy_Report:
-
The planimetric data has a <9.79 ft. horizontal accuracy at 95% confidence level, National Standard for Spatial Data Accuracy (NSSDA), for a 2.0 foot Ground Resolution Distance (GRD). Horizontal accuracy determined as 1.7308 times the RMSE circular error(1.4142 x 4' = 5.657'). This requirement will not be applicable in areas where the ground is obscured on the aerial photography by foliage, prevalent smoke, or dense shadow.
- Vertical_Positional_Accuracy:
-
- Vertical_Positional_Accuracy_Report:
-
All DEM data will meet a vertical accuracy of +/- ten (10) feet at the 95% confidence level consistant with NSSDA standards. This requirement will not be applicable in areas where the ground is obscured on the aerial photography by foliage, prevalent smoke, or dense shadow.
- Lineage:
-
- Source_Information:
-
- Source_Citation:
-
- Citation_Information:
-
- Originator: T3 Global Strategies, Inc.
- Publication_Date: 20031013
- Title: GPS Photo Control Survey for the State of West Virginia
- Geospatial_Data_Presentation_Form: tabular digital data
- Publication_Information:
-
- Publication_Place: Bridgeville, PA
- Publisher: T3 Global Strategies, Inc.
- Type_of_Source_Media: CD-ROM
- Source_Time_Period_of_Content:
-
- Time_Period_Information:
-
- Range_of_Dates/Times:
-
- Beginning_Date: 20030301
- Ending_Date: 20030828
- Source_Currentness_Reference: ground condition
- Source_Citation_Abbreviation: GPS Ground Control
- Source_Contribution:
-
To supplement the airborne GPS control network a total of 153 photo control points were captured as well as an additional 54 quality assurance control points that were incorporated in the quality assurance testing of the aerotriangulation. All horizontal and vertical control was prepared under the supervision of State of West Virginia licensed Professional Land Surveyors.
- Source_Information:
-
- Source_Citation:
-
- Citation_Information:
-
- Originator: Photo Science, Inc.
- Publication_Date: 20030630
- Publication_Time: Unknown
- Title: Aerial Imagery Acquisition of the State of West Virginia
- Geospatial_Data_Presentation_Form: remote-sensing image
- Publication_Information:
-
- Publication_Place: Lexington, KY
- Publisher: Photo Science, Inc.
- Source_Scale_Denominator: 28800
- Type_of_Source_Media: filmstrip
- Source_Time_Period_of_Content:
-
- Time_Period_Information:
-
- Range_of_Dates/Times:
-
- Beginning_Date: 20030310
- Beginning_Time: unknown
- Ending_Date: 20030606
- Ending_Time: unknown
- Source_Currentness_Reference: ground condition
- Source_Citation_Abbreviation: Aerial Photography
- Source_Contribution:
-
Aerial photography was acquired using a flight design that included a total of 8612 exposures in 440 North-South oriented flight lines and 20 cross-tie lines. Aerial photography was exposed on Kodak Color Aerial 2 film 2444. Aerial photogaphy was supplemented with the simultaneous acquisition of airborne GPS data, which captured the ground coordinate for the nadir point of each photograph. Aerial photography was exposed at an altitude of 14400' above mean terrain yielding an approximate scale of 1:28800.
- Source_Information:
-
- Source_Citation:
-
- Citation_Information:
-
- Originator: BAE SYSTEMS ADR
- Publication_Date: 20040130
- Publication_Time: Unknown
- Title: Analytical aerotriangulation
- Geospatial_Data_Presentation_Form: tabular digital data
- Publication_Information:
-
- Publication_Place: Mt. Laurel, NJ
- Publisher: BAE SYSTEMS ADR
- Type_of_Source_Media: CD-ROM
- Source_Time_Period_of_Content:
-
- Time_Period_Information:
-
- Single_Date/Time:
-
- Calendar_Date: 20040130
- Source_Currentness_Reference: ground condition
- Source_Citation_Abbreviation: Analytical aerotriangulation
- Source_Contribution:
-
Softcopy aerotriangulation was performed utilizing the airborne GPS data, GPS ground control and image coordinate measurements allowing the direct computation of the exterior orientation parameters for each image of the project.
- Process_Step:
-
- Process_Description:
-
Aerial photography was acquired using a flight design that included a total of 8612 exposures in 440 North-South oriented flight lines and 20 cross-tie lines. Aerial photography was exposed on Kodak Color Aerial 2 film 2444. Aerial photogaphy was supplemented with the simultaneous acquisition of airborne GPS data, which captured the ground coordinate for the nadir point of each photograph. Aerial photography was exposed at an altitude of 14400' above mean terrain yielding an approximate scale of 1:28800.
- Process_Date: 20030606
- Source_Produced_Citation_Abbreviation: Aerial Photography
- Process_Contact:
-
- Contact_Information:
-
- Contact_Organization_Primary:
-
- Contact_Organization: BAE SYSTEMS ADR
- Contact_Person: Sandra Elfreth-Howery
- Contact_Position: Project Manager
- Contact_Address:
-
- Address_Type: mailing and physical address
- Address: 124 Gaither Drive
- Address: Suite 100
- City: Mt. Laurel
- State_or_Province: NJ
- Postal_Code: 08054
- Country: USA
- Contact_Voice_Telephone: 856-866-9700
- Contact_Facsimile_Telephone: 856-866-7800
- Contact_Electronic_Mail_Address: s.elfreth.howery@adrinc.com
- Hours_of_Service: 0800-1700
- Process_Step:
-
- Process_Description:
-
Softcopy aerotriangulation utilizes the GPS ground control and image coordinate measurements which are run through bundle block adjustment software computing the exterior orientation parameters for each image of the photogrammetric project. The original aerial film was scanned utilizing a Socet Set DSW600 precision photogrammetric scanner at a resolution of 12.5 microns. Using these scans the aerotriangulation process employs a rigorous mathematical model which detects measurement errors, and corrects for systematic image distortion, film shrikage, atmospheric refraction and camera lens distortions. The final bundle adjustment results are inspected to ensure that the RMSE meets the required 1 part in 10000.
- Source_Used_Citation_Abbreviation: GPS Ground Control
- Source_Used_Citation_Abbreviation: Aerial Photography
- Process_Date: 20040130
- Source_Produced_Citation_Abbreviation: Analytical Aerotriangulation
- Process_Contact:
-
- Contact_Information:
-
- Contact_Organization_Primary:
-
- Contact_Organization: BAE SYSTEMS ADR
- Contact_Person: Sandra Elfreth-Howery
- Contact_Position: Project Manager
- Contact_Address:
-
- Address_Type: mailing and physical address
- Address: 124 Gaither drive
- Address: Suite 100
- City: Mt. Laurel
- State_or_Province: NJ
- Postal_Code: 08054
- Country: USA
- Contact_Voice_Telephone: 856-866-9700
- Contact_Facsimile_Telephone: 856-866-7800
- Contact_Electronic_Mail_Address: s.elfreth.howery@adrinc.com
- Hours_of_Service: 0800-1700
- Process_Step:
-
- Process_Description:
-
The procedure utilized for the development of the DTM/DEM development used a combination of automated and manual techniques. The initial phase produced an intermediate terrain data set using a series of automatic data processing algorithms known as Automatic Terrain Extraction. This data set is further refined using a series of automatic filtering techniques, along with visual inspection and editing processes to produce a fully compliant DEM meeting the project specifications. To enhance the results of the ATE process linear and polygonal break line information was collected in all areas where a more rigorous data set was required to define changing terrain conditions. This break line data is then merged into the correlated terrain file and used to influence the DTM by correcting areas where the ATE process has failed to depict the terrain accurately.
- Source_Used_Citation_Abbreviation: Aerial Photography
- Source_Used_Citation_Abbreviation: Analytical Aerotriangulation
- Process_Date: 20040615
- Source_Produced_Citation_Abbreviation: DTM/DEM
- Process_Contact:
-
- Contact_Information:
-
- Contact_Organization_Primary:
-
- Contact_Organization: BAE SYSTEMS ADR
- Contact_Person: Sandra Elfreth-Howery
- Contact_Position: Project Manager
- Contact_Address:
-
- Address_Type: mailing and physical address
- Address: 124 Gaither Drive
- Address: Suite 100
- City: Mt. Laurel
- State_or_Province: NJ
- Postal_Code: 08054
- Country: USA
- Contact_Voice_Telephone: 856-866-9700
- Contact_Facsimile_Telephone: 856-866-7800
- Contact_Electronic_Mail_Address: s.elfreth.howery@adrinc.com
- Hours_of_Service: 0800-1700
- Process_Step:
-
- Process_Description:
-
The SAMB required its Project Management Team (Michael Baker Jr, Inc.) to perform independent quality assurance in order to certify final product acceptance. Baker used NSSDA automated and visual tests of attribute accuracy, logical consistency, completeness, and adherence to SAMB project data specifications.
- Source_Used_Citation_Abbreviation: DTM/DEM
- Process_Date: 20040630
- Source_Produced_Citation_Abbreviation: Independant Quality Assurance Report
- Process_Contact:
-
- Contact_Information:
-
- Contact_Person_Primary:
-
- Contact_Person: Joseph Seppi C.M.S.
- Contact_Organization: Michael Baker Jr., Inc
- Contact_Position: Special Projects Director
- Contact_Address:
-
- Address_Type: mailing and physical address
- Address: 5088 W. Washington St.
- City: Charleston
- State_or_Province: WV
- Postal_Code: 25013
- Country: USA
- Contact_Voice_Telephone: 304-769-2115
- Contact_Facsimile_Telephone: 304-769-0822
- Contact_Electronic_Mail_Address: jseppi@mbakercorp.com
- Spatial_Data_Organization_Information:
-
- Direct_Spatial_Reference_Method: Vector
- Point_and_Vector_Object_Information:
-
- SDTS_Terms_Description:
-
- SDTS_Point_and_Vector_Object_Type: Entity point
- Point_and_Vector_Object_Count: 0
- SDTS_Terms_Description:
-
- SDTS_Point_and_Vector_Object_Type: String
- Point_and_Vector_Object_Count: 0
- SDTS_Terms_Description:
-
- SDTS_Point_and_Vector_Object_Type: G-polygon
- Point_and_Vector_Object_Count: 0
- SDTS_Terms_Description:
-
- SDTS_Point_and_Vector_Object_Type: Entity point
- Point_and_Vector_Object_Count: 0
- Spatial_Reference_Information:
-
- Horizontal_Coordinate_System_Definition:
-
- Planar:
-
- Grid_Coordinate_System:
-
- Grid_Coordinate_System_Name: State Plane Coordinate System
- State_Plane_Coordinate_System:
-
- SPCS_Zone_Identifier: 4701
- Lambert_Conformal_Conic:
-
- Standard_Parallel: 39.000000
- Standard_Parallel: 40.25
- Longitude_of_Central_Meridian: -79.50000
- Latitude_of_Projection_Origin: 38.500000
- False_Easting: 1968500.000000
- False_Northing: 0.000000
- Planar_Coordinate_Information:
-
- Planar_Coordinate_Encoding_Method: coordinate pair
- Coordinate_Representation:
-
- Abscissa_Resolution: 0.01
- Ordinate_Resolution: 0.01
- Planar_Distance_Units: survey feet
- Geodetic_Model:
-
- Horizontal_Datum_Name: North American Datum of 1983
- Ellipsoid_Name: Geodetic Reference System 80
- Semi-major_Axis: 6378137.000000
- Denominator_of_Flattening_Ratio: 298.257222
- Vertical_Coordinate_System_Definition:
-
- Altitude_System_Definition:
-
- Altitude_Datum_Name: North American Vertical Datum of 1988
- Altitude_Resolution: 0.1
- Altitude_Distance_Units: feet
- Altitude_Encoding_Method:
-
Explicit elevation coordinate included with horizontal coordinates
- Entity_and_Attribute_Information:
-
- Detailed_Description:
-
- Entity_Type:
-
- Entity_Type_Label: Point
- Attribute:
-
- Attribute_Label: FID
- Attribute_Definition: Internal feature number.
- Attribute_Definition_Source: ESRI
- Attribute_Domain_Values:
-
- Unrepresentable_Domain:
-
Sequential unique whole numbers that are automatically generated.
- Attribute:
-
- Attribute_Label: Shape
- Attribute_Definition: Feature geometry.
- Attribute_Definition_Source: ESRI
- Attribute_Domain_Values:
-
- Unrepresentable_Domain: Coordinates defining the features.
- Attribute:
-
- Attribute_Label: Entity
- Attribute:
-
- Attribute_Label: Layer
- Attribute:
-
- Attribute_Label: Level
- Attribute:
-
- Attribute_Label: Color
- Attribute:
-
- Attribute_Label: Linetype
- Attribute:
-
- Attribute_Label: Text
- Detailed_Description:
-
- Entity_Type:
-
- Entity_Type_Label: Polyline
- Attribute:
-
- Attribute_Label: FID
- Attribute_Definition: Internal feature number.
- Attribute_Definition_Source: ESRI
- Attribute_Domain_Values:
-
- Unrepresentable_Domain:
-
Sequential unique whole numbers that are automatically generated.
- Attribute:
-
- Attribute_Label: Shape
- Attribute_Definition: Feature geometry.
- Attribute_Definition_Source: ESRI
- Attribute_Domain_Values:
-
- Unrepresentable_Domain: Coordinates defining the features.
- Attribute:
-
- Attribute_Label: Entity
- Attribute:
-
- Attribute_Label: Layer
- Attribute:
-
- Attribute_Label: Level
- Attribute:
-
- Attribute_Label: Color
- Attribute:
-
- Attribute_Label: Linetype
- Attribute:
-
- Attribute_Label: Text
- Detailed_Description:
-
- Entity_Type:
-
- Entity_Type_Label: Polygon
- Attribute:
-
- Attribute_Label: FID
- Attribute_Definition: Internal feature number.
- Attribute_Definition_Source: ESRI
- Attribute_Domain_Values:
-
- Unrepresentable_Domain:
-
Sequential unique whole numbers that are automatically generated.
- Attribute:
-
- Attribute_Label: Shape
- Attribute_Definition: Feature geometry.
- Attribute_Definition_Source: ESRI
- Attribute_Domain_Values:
-
- Unrepresentable_Domain: Coordinates defining the features.
- Attribute:
-
- Attribute_Label: Entity
- Attribute:
-
- Attribute_Label: Layer
- Attribute:
-
- Attribute_Label: Level
- Attribute:
-
- Attribute_Label: Color
- Attribute:
-
- Attribute_Label: Linetype
- Attribute:
-
- Attribute_Label: Text
- Detailed_Description:
-
- Entity_Type:
-
- Entity_Type_Label: Annotation
- Attribute:
-
- Attribute_Label: FID
- Attribute_Definition: Internal feature number.
- Attribute_Definition_Source: ESRI
- Attribute_Domain_Values:
-
- Unrepresentable_Domain:
-
Sequential unique whole numbers that are automatically generated.
- Attribute:
-
- Attribute_Label: Shape
- Attribute_Definition: Feature geometry.
- Attribute_Definition_Source: ESRI
- Attribute_Domain_Values:
-
- Unrepresentable_Domain: Coordinates defining the features.
- Attribute:
-
- Attribute_Label: Entity
- Attribute:
-
- Attribute_Label: Layer
- Attribute:
-
- Attribute_Label: Level
- Attribute:
-
- Attribute_Label: Color
- Attribute:
-
- Attribute_Label: Style
- Attribute:
-
- Attribute_Label: FontId
- Attribute:
-
- Attribute_Label: Text
- Attribute:
-
- Attribute_Label: Height
- Attribute:
-
- Attribute_Label: Angle
- Overview_Description:
-
- Entity_and_Attribute_Overview:
-
This data set contains DEM information consisting of breaklines and mass points in MicroStation DGN format. Hard breaklines, soft breaklines and exclusion areas shown as MicroStation lines. The mass points are shown as MicroStation active points.
- Entity_and_Attribute_Detail_Citation:
-
WVSAMB Project Plan Procedures Manual for Advanced Photogrammetric Mapping Services for Statewide Enhanced 9-1-1 and Rural Addressing and Additional E 9-1-1 Addressing Services, July 10, 2003.
- Distribution_Information:
-
- Distributor:
-
- Contact_Information:
-
- Contact_Organization_Primary:
-
- Contact_Organization: West Virginia Statewide Addressing and Mapping Board
- Contact_Address:
-
- Address_Type: mailing and physical address
- Address: 1124 Smith Street
- Address: Room LM-10
- City: Charleston
- State_or_Province: WV
- Postal_Code: 25301
- Country: USA
- Contact_Voice_Telephone: 304-558-4218
- Contact_Facsimile_Telephone: 304-558-4963
- Contact_Electronic_Mail_Address: cneidig@gis.state.wv.us
- Hours_of_Service: 0800-1600, ET
- Resource_Description: Tile Name
- Distribution_Liability:
-
To be determined. Law Enforcement Sensitive. Not for distribution.
- Standard_Order_Process:
-
- Digital_Form:
-
- Digital_Transfer_Information:
-
- Format_Name: DGN
- Format_Information_Content: DEM consisting of breaklines and mass points
- Digital_Transfer_Option:
-
- Offline_Option:
-
- Offline_Media: TBD
- Recording_Format: TBD
- Fees: TBD as of 2/2004
- Custom_Order_Process: TBD as of 2/2004
- Metadata_Reference_Information:
-
- Metadata_Date: 20040818
- Metadata_Contact:
-
- Contact_Information:
-
- Contact_Person_Primary:
-
- Contact_Person: Sandra Elfreth-Howery
- Contact_Organization: BAE SYSTEMS ADR
- Contact_Position: Project Manager
- Contact_Address:
-
- Address_Type: mailing and physical address
- Address: 124 Gaither Drive
- Address: Suite 100
- City: Mt. Laurel
- State_or_Province: NJ
- Postal_Code: 08054
- Country: USA
- Contact_Voice_Telephone: 856-866-9700
- Contact_Facsimile_Telephone: 856-866-7800
- Contact_Electronic_Mail_Address: s.elfreth.howery@adrinc.com
- Metadata_Standard_Name: FGDC Content Standards for Digital Geospatial Metadata
- Metadata_Standard_Version: FGDC-STD-001-1998
- Metadata_Time_Convention: local time
- Metadata_Extensions:
- Metadata_Extensions:
-
- Online_Linkage: <http://www.esri.com/metadata/esriprof80.html>
- Profile_Name: ESRI Metadata Profile
Generated by mp version 2.7.33 on Wed Aug 18 13:42:34 2004